Part Number Hot Search : 
15389F HC245 MBR2530 2SB0789 1N5404K MUR8100E 74477005 0ACPZ
Product Description
Full Text Search
 

To Download JBW05-10R Datasheet File
  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
　
 

  Datasheet File OCR Text:
 A122_JBW (1/24)
Wide input, compact and device-embedded type
TDK Switching Power Supply
J SERIES JBW
UL/CSA, EN60950 approved and Electric Appliances And Material Control Law compliant, CE marking product
[FEATURES] * Compact and low price. * Wide input voltage range type. * Safety standards approved and Electric Appliances And Material Control Law compliant. * Corresponds to products with CE marking. * Full lineup of output power 10 to 50W * Open frame * Noise terminal voltage FCC Class B satisfied. * Warranty period: 3 years * Specific bromine inflammable materials (PBDPEs, PBBs) are not included in use. [APPLICATIONS] Measuring equipment, robotics, automation equipment, information processing equipment, security systems, amusement equipment, etc. [SAFETY STANDARDS] UL1950, CSA950-95, EN60950 approved, and Electric Appliances And Material Control Law compliant. [EMC REGULATIONS] FCC Class-B, VCCI Class-B, EN-55011-B and EN55022-B compliant. [PRODUCT IDENTIFICATION]
(3-year warranty period)
JBW 05 - 2R0
Rated output current Rated output voltage Series name
PART NUMBERS AND RATINGS
Output voltage 10W Type (V) Current(A) 5 2 12 0.9 15 0.7 24 0.5 Part No. JBW05-2R0 JBW12-0R9 JBW15-0R7 JBW24-0R5 15W Type Current(A) 3 1.3 1.0 0.7 Part No. JBW05-3R0 JBW12-1R3 JBW15-1R0 JBW24-0R7 30W Type Current(A) 6 2.5 2 1.3 Part No. JBW05-6R0 JBW12-2R5 JBW15-2R0 JBW24-1R3 50W Type Current(A) 10 4.3 3.5 2.1 Part No. JBW05-10R JBW12-4R3 JBW15-3R5 JBW24-2R1
* :Stock products. * For the product of 50W minimum output voltage, please order JAW Series compliant with Harmonics current requirement .
All specifications are subject to change without notice.
A122_JBW (2/24)
TDK Switching Power Supply
J SERIES JBW10W TYPE
UL/CSA, EN60950 approved and Electric Appliances And Material Control Law compliant, CE marking product
SPECIFICATIONS AND STANDARDS
PART NO. JBW05-2R0 JBW12-0R9 JBW15-0R7 JBW24-0R5 Rated output voltage and current1 5V * 2A 12V * 0.9A 15V * 0.7A 24V * 0.5A Maximum output power W 10 10.8 10.5 12 INPUT CONDITIONS Input voltage Eac/Edc V 85 to 265[Rating: 100 to 240]/110 to 370 Input frequency Hz 47 to 440[Rating: 50 to 60](Single phase) Input current A 0.25typ./0.35max. [AC.100V]0.15typ./0.25max.[AC.240V] Fuse rating A 2[AC.250V, built-in] Surge current A 15typ.(20max.)[AC.100V]30typ.(40max.)[AC.240V] 1st surge current, cold start, reset after 1s minimum. Leakage current mA 0.1typ./0.75max.[AC.100V, 60Hz]0.15typ./0.75max.[AC.240V, 60Hz] Power factor 0.6typ./0.45typ.[AC.100/240V] % 100V 71typ. 78typ. 79typ. 82typ. Efficiency % 240V 71typ. 79typ. 80typ. 83typ. OUTPUT CHARACTERISTICS Output voltage Edc V 5 12 15 24 Voltage variable range Edc V Fixed Fixed Fixed Fixed Maximum output current A 2 0.9 0.7 0.5 Minimum output current A 0 0 0 0 Overvoltage threshold Edc V 5.75min. 13.8min. 17.25min. 27.6min. Overcurrent threshold A 2.5min. 1.12min. 0.87min. 0.62min. Input variation % 0.4max.[Within the input voltage range] Load variation % 0.8max.[0 to 100% load] Voltage Temperature variation % 1max.[Ambient temperature: -10 to +50C] stability Drift % 0.4max.[25C, input and output ratings, after input voltage ON for 30min to 8h] Dynamic load % 4max.[50 to 100% sudden load change] Ripple Ep-p mV 80max. 120max. 120max. 120max. Ripple noise Ep-p mV 120max. 150max. 150max. 150max. Start up time ms 700max.(200typ.)/700max.(200typ.) [AC.100/240V] Hold up time ms 15typ/140typ [AC.100/240V] AUXILIARY FUNCTIONS Indicator display No Overvoltage protection Zenor diode clamp method, output may latch up depending on the condition. Overcurrent protection Fixed current and voltage threshold type, automatic recovery. Remote ON-OFF No Remote sensing No Parallel operation No Series operation Yes Output voltage external variable function No STANDARDS Safety standards UL1950, CSA950-95, EN60950 approved, Electrical Appliance And Material Control Low compliant. Noise terminal voltage FCC-B, VCCI-B, EN55011-B, EN55022-B compliant. Input harmonics current requirement No CONSTRUCTIONS External dimensions mm 21x36x95[HxWxL] Weight g 50max. Mounting method Can be attached to 1 side. Case material No(PWB Material CEM3) 1 Current rating(maximum output current) is determined for -10 to +50C. Derating is required when used outside this temperature range. * Optional input, output cable kits are available at a separate price.
All specifications are subject to change without notice.
A122_JBW (3/24)
TDK Switching Power Supply
J SERIES JBW10W TYPE
UL/CSA, EN60950 approved and Electric Appliances And Material Control Law compliant, CE marking product
SHAPES AND DIMENSIONS JBW10W TYPE
95 7 Area For Spacer(o6.0max.) Solder Side 3.5 3.5
Dimensions in mm 1mm : without specified dimensions
2-o3.4Mounting holes
5.2
21 3max.
10
TB1 L TDK JBW05-2R0
N
3.8
7
Ser. No. LABEL 3.5 7 GND Pad Solder Side 880.5
13.8
290.5
36
TB2 + + _ _
7
16.4
1.6
All specifications are subject to change without notice.
A122_JBW (4/24)
TDK Switching Power Supply
J SERIES JBW15W TYPE
UL/CSA, EN60950 approved and Electric Appliances And Material Control Law compliant, CE marking product
SPECIFICATIONS AND STANDARDS
PART NO. JBW05-3R0 JBW12-1R3 JBW15-1R0 JAW24-0R7 Rated output voltage and current1 5V * 3A 12V * 1.3A 15V * 1.0A 24V * 0.7A Maximum output power W 15 15.6 15 16.8 INPUT CONDITIONS Input voltage Eac/Edc V 85 to 265[Rating: 100 to 240]/110 to 370 Input frequency Hz 47 to 440[Rating: 50 to 60](Single phase) Input current A 0.36typ./0.43max.[AC.100V]0.20typ./0.24max.[AC.240V] Fuse rating A 2[AC.250V, built-in] Surge current A 15typ./19.5max.[AC.100V]30typ./41max.[AC.240V] 1st surge current, cold start, reset after 1s minimum. Leakage current mA 0.2typ./0.75max.[AC.100V, 60Hz]0.3typ./0.75max.[AC.240V, 60Hz] Power factor 0.6typ./0.45typ.[AC.100/240V] % 100V 72typ. 76typ. 76typ. 78typ. Efficiency % 240V 72typ. 74typ. 74typ. 76typ. OUTPUT CHARACTERISTICS Output voltage Edc V 5 12 15 24 Voltage variable range Edc V Fixed Fixed Fixed Fixed Maximum output current A 3 1.3 1 0.7 Minimum output current A 0 0 0 0 Overvoltage threshold Edc V 5.75min. 13.8min. 17.25min. 27.6min. Overcurrent threshold A 3.15min. 1.37min. 1.05min. 0.74min. Input variation % 0.4max.[Within the input voltage range] Load variation % 0.8max.[0 to 100% load] Voltage 1max.[Ambient temperature: -10 to +50C] stability Temperature variation % Drift % 0.4max.[25C, input and output ratings, after input voltage ON for 30min to 8h] Dynamic load % 4max.[50 to 100% sudden load change] Ripple Ep-p mV 80max. 120max. 120max. 120max. Ripple noise Ep-p mV 120max. 150max. 150max. 150max. Start up time ms 200max.(25typ.)/100max.(25typ.)[AC.100/240V] Hold up time ms 13typ./150typ. [AC.100/240V] AUXILIARY FUNCTIONS Indicator display No Overvoltage protection Zenor diode clamp method, output may latch up depending on the condition. Overcurrent protection Fixed current and voltage threshold type, automatic recovery. Remote ON-OFF No Remote sensing No Parallel operation No Series operation Yes Output voltage external variable function No STANDARDS Safety standards UL1950, CSA950-95, EN60950 approved, Electrical Appliance And Material Control Low compliant. Noise terminal voltage FCC-B, VCCI-B, EN55011-B, EN55022-B compliant. Input harmonics current requirement No CONSTRUCTIONS External dimensions mm 22.6x50x95[HxWxL] Weight g 80max. Mounting method Can be attached to 1 side. Case material No(PWB Material CEM3) 1 Current rating(maximum output current) is determined for -10 to +50C. Derating is required when used outside this temperature range. * Optional input, output cable kits are available at a separate price.
All specifications are subject to change without notice.
A122_JBW (5/24)
TDK Switching Power Supply
J SERIES JBW15W TYPE
UL/CSA, EN60950 approved and Electric Appliances And Material Control Law compliant, CE marking product
SHAPES AND DIMENSIONS JBW15W TYPE
4-o3.4Mounting holes 95 880.5 3.5
Dimensions in mm 1mm : without specified dimensions
22.6 3max.
23.7
5.2
TB1 TDK JBW05-3R0 50 L N
TB3
7
7
3.5
430.5
+ + _ _
28
3.8
Ser. No. LABEL 7 GND Pad Solder Side 7
18.5
1.6
Area For Spacer (o6.0max.) Solder Side 3 Places
All specifications are subject to change without notice.
A122_JBW (6/24)
TDK Switching Power Supply
J SERIES JBW30W TYPE
UL/CSA, EN60950 approved and Electric Appliances And Material Control Law compliant, CE marking product
SPECIFICATIONS AND STANDARDS
PART NO. JBW05-6R0 JBW12-2R5 JBW15-2R0 JAW24-1R3 Rated output voltage and current1 5V * 6A 12V * 2.5A 15V * 2A 24V * 1.3A Maximum output power W 30 30 30 31.2 INPUT CONDITIONS Input voltage Eac/Edc V 85 to 265[Rating: 100 to 240]/110 to 370 Input frequency Hz 47 to 440[Rating: 50 to 60](Single phase) Input current A 0.65typ./0.86max.[AC.100V]0.35typ./0.48max.[AC.240V] Fuse rating A 2[AC.250V, built-in] Surge current A 15typ./30max.[AC.100V]30typ./60max.[AC.240V] 1st surge current, cold start, reset after 1s minimum. Leakage current mA 0.35typ./0.75max.[AC.100V, 60Hz]0.5typ./0.75max.[AC.240V, 60Hz] Power factor 0.6typ./0.45typ.[AC.100/240V] % 100V 75typ. 78typ. 79typ. 80typ. Efficiency % 240V 77typ. 79typ. 80typ. 81typ. OUTPUT CHARACTERISTICS Output voltage Edc V 5 12 15 24 Voltage variable range Edc V Fixed Fixed Fixed Fixed Maximum output current A 6 2.5 2 1.3 Minimum output current A 0 0 0 0 Overvoltage threshold Edc V 5.6min. 13.3min. 16.6min. 26.5min. Overcurrent threshold A 6.3min. 2.7min. 2.1min. 1.4min. Input variation % 0.4max.[Within the input voltage range] Load variation % 0.8max.[0 to 100% load] Voltage 2max.[Ambient temperature: -10 to +50C] stability Temperature variation % Drift % 0.4max.[25C, input and output ratings, after input voltage ON for 30min to 8h] Dynamic load % 4max.[50 to 100% sudden load change] Ripple Ep-p mV 80max. 120max. 120max. 120max. Ripple noise Ep-p mV 120max. 150max. 150max. 150max. Start up time ms 900max.(700typ.)/450max.(260typ.)[AC.100/240V] Hold up time ms 20typ./160typ.[AC.100/240V] AUXILIARY FUNCTIONS Indicator display No Overvoltage protection Voltage shut-down type. Overcurrent protection Fixed current and voltage threshold type, automatic recovery. Remote ON-OFF No Remote sensing No Parallel operation No Series operation Yes Output voltage external variable function No STANDARDS Safety standards UL1950, CSA950-95, EN60950 approved, Electrical Appliance And Material Control Low compliant. Noise terminal voltage FCC-B, VCCI-B, EN55011-B, EN55022-B compliant. Input harmonics current requirement No CONSTRUCTIONS External dimensions mm 26x55x122[HxWxL] Weight g 150max. Mounting method Can be attached to 1 side. Case material No(PWB Material CEM3) 1 Current rating(maximum output current) is determined for -10 to +50C. Derating is required when used outside this temperature range. * Optional input, output cable kits are available at a separate price.
All specifications are subject to change without notice.
A122_JBW (7/24)
TDK Switching Power Supply
J SERIES JBW30W TYPE
UL/CSA, EN60950 approved and Electric Appliances And Material Control Law compliant, CE marking product
SHAPES AND DIMENSIONS JBW30W TYPE
122 GND Pad 2 Places Solder Side 1120.5 5
Dimensions in mm 1mm : without specified dimensions
4-o3.4Mounting holes 26 3max.
16
L
TB2 _ _ + +
8
8
8
Ser. No. LABEL Area For Spacer (o6.0max.) Solder Side 2 Places
8
5
450.5
N 55
3.8 JBW05-6R0
30 TDK
TB1
21.4
1.6
All specifications are subject to change without notice.
A122_JBW (8/24)
TDK Switching Power Supply
J SERIES JBW50W TYPE
UL/CSA, EN60950 approved and Electric Appliances And Material Control Law compliant, CE marking product
SPECIFICATIONS AND STANDARDS
PART NO. JBW05-10R JBW12-4R3 JBW15-3R5 JBW24-2R1 Rated output voltage and current1 5V * 10A 12V * 4.3A 15V * 3.5A 24V * 2.1A Maximum output power W 50 51.6 52.5 50.4 INPUT CONDITIONS Input voltage Eac/Edc2 V 85 to 265[Rating: 100 to 240]/120 to 375 Input frequency Hz 47 to 66[Rating: 50 to 60](Single phase) Input current A 0.7typ./0.88max. [AC.100V]0.35typ./0.5max.[AC.240V] Fuse rating A 3.15[AC.250V, built-in] Surge current A 15typ.(30max.)[AC.100V]40typ.(60max.)[AC.240V] cold start Leakage current mA 0.35typ./0.75max.[AC.100V, 60Hz]0.5typ./0.75max.[AC.240V, 60Hz] Power factor 0.99typ./0.93typ.[AC.100/240V] % 100V 77typ. 80typ. 80typ. 81typ. Efficiency % 240V 79typ. 81typ. 81typ. 83typ. OUTPUT CHARACTERISTICS Output voltage Edc V 5 12 15 24 Voltage variable range Edc3 V Fixed Fixed Fixed Fixed Maximum output current A 10 4.3 3.5 2.1 Minimum output current A 0 0 0 0 Overvoltage threshold Edc V 5.75 to 6.9 13.8 to 16.8 17.2 to 21 27.6 to 33.6 Overcurrent threshold A 10.5min. 5.4min. 4.4min. 2.7min. Input variation % 0.4max.[Within the input voltage range] Load variation % 0.8max.[0 to 100% load] Voltage Temperature variation % 1max.[Ambient temperature: -10 to +50C] stability Drift % 0.4max.[25C, input and output ratings, after input voltage ON for 30min to 8h] Dynamic load % 4max.[50 to 100% sudden load change] Ripple Ep-p mV 80max. 120max. 120max. 120max. Ripple noise Ep-p mV 120max. 150max. 150max. 150max. Start up time ms 500max.(400typ.)/500max.(400typ.) [AC.100/240V] Hold up time ms 20typ./20typ. [AC.100/240V] AUXILIARY FUNCTIONS Indicator display No Overvoltage protection Voltage shut-down type. Overcurrent protection Fixed current and voltage threshold type, automatic recovery. Remote ON-OFF No Remote sensing No Parallel operation No Series operation Yes Output voltage external variable function No STANDARDS Safety standards UL1950, CSA950-95, EN60950 approved, Electrical Appliance And Material Control Low compliant. Noise terminal voltage FCC-B, VCCI-B, EN55011-B, EN55022-B compliant. Input harmonics current requirement EN61000-3-2 compliant CONSTRUCTIONS External dimensions mm 26x55x190[HxWxL] Weight g 220max. Mounting method Can be attached to 1 side. Case material No(PWB Material CEM3) 1 Current rating(maximum output current) is determined for -10 to +50C. Derating is required when used outside this temperature range. 2 Please note that the deterioration of parts is occasionally caused when operating for a long time(over 10 minutes) with the voltage below the range of the input voltage. 3 Please contact us when the output voltage external variable function is necessary. * Optional input, output cable kits are available at a separate price.
All specifications are subject to change without notice.
A122_JBW (9/24)
TDK Switching Power Supply
J SERIES JBW50W TYPE
UL/CSA, EN60950 approved and Electric Appliances And Material Control Law compliant, CE marking product
SHAPES AND DIMENSIONS JBW50W TYPE
GND Pad 2 Places Solder Side
Dimensions in mm 1mm : without specified dimensions
4-o4.0 Mounting holes
190.0 5.0 1800.5 5.0
26.0 3.0max
12.1
TB2
55.0
L
TB1
Ser. No. LABEL
_ _ + +
8.0
8.0
8.0
Area For Spacer (o6.0max) Solder Side 2 Places
5.0 8.0
5.0
17.2
45.00.5
N
21.4
1.6
RATING LABEL
JBW05-10R TDK
All specifications are subject to change without notice.
A122_JBW (10/24)
TDK Switching Power Supply
Characteristics, Functions, and Applications
BLOCK DIAGRAMS
JBW10W/15W/30W
L AC input N Input filter circuit Input rectifier circuit Surge current limiting circuit Input smoothing circuit Overcurrent detection circuit Power switching circuit Output rectifying and smoothing circuit + DC OUT -
Overvoltage protection
Drive circuit
PWM control circuit
Output voltage control circuit
JBW50W
Surge current limiting circuit Output rectifying and smoothing circuit Overcurrent detection circuit Power switching circuit
L AC input N
Input filter circuit
Input smoothing circuit
Boost-up circuit
+ DC OUT -
PFC control circuit
Drive circuit
Overvoltage detection circuit Control circuit Output voltage detection circuit
COMMON SPECIFICATIONS
Temperature and humidity Operating(C) Temperature range Operating available(C) Storage(C) Operating(%)RH Humidity range Storage(%)RH Amplitude and vibration 5 to 10Hz Amplitude 10 to 200Hz Acceleration Vibration Vibration time Withstand voltage and insulation resistance Input terminal to ground terminal( ) Withstand voltage Input terminal to output terminal Output terminal to ground terminal( ) Input terminal to ground terminal( ) Insulation resistance Input terminal to output terminal Output terminal to ground terminal( ) -10 to +60 -20 to -10 -30 to +75 20 to 95[Maximum wet-bulb temperature: 35C, without dewing]
All amplitude 10mm[3 directions, each 1h] Acceleration 19.6m/s2 [2G, 3 directions, each 1h] 588m/s2 [60G, 3 directions, each 3 times] 115ms Eac(kV)2, 1min[Normal temperature, normal humidity, cutout current 10mA] Eac(kV)3, 1min[Normal temperature, normal humidity, cutout current 10mA] Eac(V)500, 1min[Normal temperature, normal humidity, cutout current 10mA] Eac(V)500, 100M min.(Normal temperature, normal humidity)
OUTPUT POWER-AMBIENT TEMPERATURE(DERATINGS) JBW10W/15W/30W/50W
100 Output power(%) 80 70 60 40 20 Available operating range (outside of warranty)
-20 -10
0
10 20 30 40 50 Ambient temperature(C)
60
71
All specifications are subject to change without notice.
A122_JBW (11/24)
TDK Switching Power Supply
Characteristics, Functions, and Applications
TERMINAL DESIGNATIONS JBW10W
TB1
L
TB2
1 2 3 4
P4
6 5
+ + _ _
P1 P2 P3
L
N
+
P3 P2 P1
N
-
1 2 3 4 5 6
Input terminal(L) Input terminal(N) Frame ground terminal( Ground pad Output terminal(-) Output terminal(+)
)
Connector made by Japan Solderless Terminal Co., Ltd.
Power supply side connector B3P5-VH-B B4B-XH-2
Cable Side Housing VHR-5N XHP-4 Terminal SVH-21T-P1.1 SXH-001T-P0.6
Option Input Output Set
Part No. 4EU00G056 4EU10G054 4EU20G054
Input Connector(TB1)VH Series
Output Connector(TB2) XH Series
JBW15W
TB1 P1 P2 P3 L N
L N
TB3 P4
1 2 3 4 6 5 + + _ _
+
P3 P2 P1
-
Connector made by Japan Solderless Terminal Co., Ltd. Input Connector(TB1) VH Series Output Connector(TB3) XH Series
Power supply side connector B3P5-VH-B B4B-XH-2
Cable Side Housing VHR-5N XHP-4 Terminal SVH-21T-P1.1 SXH-001T-P0.6
Option Input Output Set
Part No. 4EU00G056 4EU10G054 4EU20G054
JBW30W
TB1 P3 P2 P1 N L
N L
4
4
TB2 P1 P2 _ _ + +
3 2 1 5 6
-
P3 P4
+
Connector made by Japan Solderless Terminal Co., Ltd. Input Connector(TB1) VH Series Output Connector(TB2) VH Series
Power supply side connector B3P5-VH-B B4B-VH-B
Cable Side Housing VHR-5N VHR-4N Terminal SVH-21T-P1.1 SVH-21T-P1.1
Option Input Output Set
Part No. 4EU00G056 4EU10G057 4EU20G057
JBW50W
TB1 P3
N
4 3 2 1 5 6
4
TB2 P1
-
P2 P1
N
L
L
_ _ + +
P2 P3 P4
+
Connector made by Japan Solderless Terminal Co., Ltd. Input Connector(TB1) VH Series Output Connector(TB2) VH Series
Power supply side connector B3P5-VH-B B4B-VH-B
Cable Side Housing VHR-5N VHR-4N Terminal SVH-21T-P1.1 SVH-21T-P1.1
Option Input Output Set
Part No. 4EU00G056 4EU10G057 4EU20G057
All specifications are subject to change without notice.
A122_JBW (12/24)
TDK Switching Power Supply
Characteristics, Functions, and Applications
INSTALLATION 1) Fix the power supply at the four corners with metal spacers (2 corners for 10W models). 2) Maintain a min. 4mm clearance distance in order to satisfy insulation and high voltage safety requirements. 3) Lay an insulating sheet under the power supply in case a min. 8mm installation space cannot be secured between the PC board and the metal sheet. 4) Provide a min. 4mm distance between heat sink or component surface and surrounding objects in order to cause a thermal convection. 5) Since components are mounted on the back (solder) side of the product, sufficient care should be taken when handling the power supply to protect the PC board from shock, vibration, torsion, etc. which can result in damage caused by cracked chip components. (Standard installation direction)
4mm min.
4mm min.
8mm min.
(Installation direction) To install the power supply in a device, apply the standard installation direction (A) or (B). In case of an installation in other directions, please contact TDK. (A) (B)
;
+ +
Metal spacer o6mm max. Component surface L
Mounting screw dia.: 3mm 4mm min.
SERIES OPERATION (TO INCREASE OUTPUT VOLTAGE OR TO OBTAIN SEPARATE OUTPUT) When the output voltage of a single power supply is insufficient, several power supplies can be connected in series in order to obtain a higher voltage or separate outputs. If power supplies A and B in the illustration below are 5V each, a 10V output can be obtained in this connection. It should be noted that, however, the output current is limited to the lower rated current value of the power supplies A and B. There is no problem if the voltages of A and B are different from each other. D1 and D2 in the illustration designate diodes for preventing reverse voltage application. They are provided for preventing internal components of the power supply having the lower rated voltage from being damaged by an applied reverse voltage caused by a short circuit in the load or the like. Use diodes which meet the following requirements: * Reverse withstanding voltage: Over twice that of the combined output voltage * Forward current: Over twice that of the output current * Forward voltage drop: As small as possible (e.g. Shottkey diode, etc.) Series connection for increasing output voltage
Power supply
UP
Power supply A
+ - D1 (A) Load
Metal sheet
Power supply B + - D2
For obtaining separate outputs, (A) should be zero voltage.
Component surface
INSULATION AND WITHSTAND VOLTAGE TESTS The insulation and withstand voltage tests may cause deterioration. Care must be taken for execution of the tests. The potential must be equal among input, output, and FG (frame ground) terminals. It is preferable to use testers that gently start up at the test-ON and automatically discharge charged energy at the test-OFF. Manual discharging after the tests should be through a resistor around 100k to 1M (Do not perform discharging at low impedance. It may cause deterioration.) In any case, take full countermeasures for electric-shock prevention.
The shaded portion indicates a side in which an output connector is arranged.
RIPPLE NOISE MEASUREMENT CONDITIONS
OTHERS 1. Unless conditions are otherwise specified in the specifications or standards, 25C and rated input-output should be applied.
Output connector
+
C1
C2
Output ripple and noise measurement point (20MHz) C1 : 100F Electrolytic capacitor C2 : 0.1F Film capacitor L : 150mm
All specifications are subject to change without notice.
Load
A122_JBW (13/24)
TDK Switching Power Supply
Characteristics, Functions, and Applications
JBW10W Characteristics 1: Typical Characteristics JBW05-2R0
AC.100V TYPE: INPUT CURRENT
0.5
AC.200V TYPE: INPUT CURRENT
0.20
0.4 Input current(A) Input current(A)
0.16
170V 240V 265V
0.3 85V 100V 0.2 132V
0.12
0.08
0.1
0.04
0
0
20
40 60 Load(%)
80
100
0
0
20
40 60 Load(%)
80
100
AC.100V TYPE: EFFICIENCY
100
AC.200V TYPE: EFFICIENCY
100
80
132V 100V 85V Efficiency(%)
80
170V 200V 265V
Efficiency(%)
60
60
40
40
20
20
0
0 0 20 40 60 Load (%) 80 100
0
20
40 60 Load (%)
80
100
AC.100V TYPE: POWER FACTOR
1.0
AC.200V TYPE: POWER FACTOR
1.0
0.8 85V 100V 132V
0.8
Power factor
0.6
Power factor
0.6 170V 240V 265V
0.4
0.4
0.2
0.2
0.0
0
20
40 60 Load (%)
80
100
0.0
0
20
40 60 Load (%)
80
100
AC.100V TYPE: SURGE CURRENT
Vin=100V 11A
AC.200V TYPE: SURGE CURRENT
Vin=240V
27.6A H : 5ms/Div V : 5A/Div
H : 5ms/Div V : 10A/Div
Enlarged view
H : 0.1ms/Div V : 5A/Div
Enlarged view
H : 0.1ms/Div V : 10A/Div
All specifications are subject to change without notice.
A122_JBW (14/24)
TDK Switching Power Supply
Characteristics, Functions, and Applications
JBW10W Characteristics 2: Typical Characteristics JBW05-2R0
AC.100/200V TYPE: -20C START UP CHARACTERISTICS AC.100/200V TYPE: +60C START UP CHARACTERISTICS
AC.265V
AC.265V
AC.85V H : 50ms/Div
AC.85V H : 50ms/Div
AC.100/200V TYPE: -20C HOLD UP CHARACTERISTICS
Off
AC.100/200V TYPE: +60C HOLD UP CHARACTERISTICS
Off
240V
170V
100V 85V
100V 85V
H : 10ms/Div
H : 10ms/Div
AC.100V/200V TYPE: -20C OVERCURRENT CURVE
6 5 AC.85V Output voltage(V) 4 3 2 1 0 0 1 2 3 4 Load current(A) 5 6
AC.100V/200V TYPE: +60C OVERCURRENT CURVE
6 5 Output voltage(V) 4 3 2 1 0 0 1 2 3 4 Load current(A) 5 6
AC.85V AC.132V
AC.265V AC.170V
AC.132V
AC.170V AC.265V
All specifications are subject to change without notice.
A122_JBW (15/24)
TDK Switching Power Supply
Characteristics, Functions, and Applications
JBW10W Characteristics 3: Typical Characteristics JBW05-2R0
AC.100V TYPE: LIFE OF ELECTROLYTIC CAPACITOR
40 35 30 Life(Years) Life(Years) 25 20 15 10 5 0 20 40 60 Load(%) 80 30C 40C 50C 60C 70C 100
AC.200V TYPE: LIFE OF ELECTROLYTIC CAPACITOR
40 35 30 25 20 15 10 5 0 20 40 60 Load(%) 80 30C 40C 50C 60C 70C 100
AC.100V TYPE: HOLD UP TIME
10000
AC.200V TYPE: HOLD UP TIME
10000
1000 Hold up time(ms)
1000 Hold up time(ms)
100 115V 100V 85V
100
240V 200V 170V
10
10
1 10 25 50 Load(%) 75 100
1 10 25 50 Load(%) 75 100
NOISE TERMINAL VOLTAGE
80 [dBV] [PEAK DATA]
70
60
VCCI-B(QP)
50
VCCI-B(AV) (FCC-B)
40
30
20
10
0 0.15 0.5 1 Frequency(MHz) 5 10 30
All specifications are subject to change without notice.
A122_JBW (16/24)
TDK Switching Power Supply
Characteristics, Functions, and Applications
JBW15W Characteristics 1: Typical Characteristics JBW05-3R0
AC.100V TYPE: INPUT CURRENT
0.5
AC.200V TYPE: INPUT CURRENT
0.25 170V
0.4 Input current(A)
85V Input current(A) 100V
0.20 240V 265V 0.15
0.3 132V 0.2
0.10
0.1
0.05
0
0
20
40 60 Load(%)
80
100
0
0
20
40 60 Load(%)
80
100
AC.100V TYPE: EFFICIENCY
100
AC.200V TYPE: EFFICIENCY
100
80 132V 100V 85V 60
80
170V 240V 265V
Efficiency(%)
Efficiency(%)
60
40
40
20
20
0
0
20
40 60 Load (%)
80
100
0
0
20
40 60 Load (%)
80
100
AC.100V TYPE: POWER FACTOR
1.0
AC.200V TYPE: POWER FACTOR
1.0
0.8 85V 100V 132V
0.8
Power factor
Power factor
0.6
0.6 170V 240V 265V 0.4
0.4
0.2
0.2
0.0
0.0 0 20 40 60 Load (%) 80 100
0
20
40 60 Load (%)
80
100
AC.100V TYPE: SURGE CURRENT
Vin=100V 12.1A
AC.200V TYPE: SURGE CURRENT
Vin=240V 30A
H : 5ms/Div V : 5A/Div
H : 5ms/Div V : 10A/Div
Enlarged view H : 0.5ms/Div V : 5A/Div
Enlarged view H : 0.5ms/Div V : 10A/Div
All specifications are subject to change without notice.
A122_JBW (17/24)
TDK Switching Power Supply
Characteristics, Functions, and Applications
JBW15W Characteristics 2: Typical Characteristics JBW05-3R0
AC.100/200V TYPE: -20C START UP CHARACTERISTICS AC.100/200V TYPE: +60C START UP CHARACTERISTICS
AC.265V
AC.265V
AC.85V H : 10ms/Div
AC.85V H : 10ms/Div
AC.100/200V TYPE: -20C HOLD UP CHARACTERISTICS
Off
AC.100/200V TYPE: +60C HOLD UP CHARACTERISTICS
Off
240V
240V
100V H : 50ms/Div 85V
100V H : 50ms/Div 85V H : 10ms/Div H : 10ms/Div H : 10ms/Div H : 10ms/Div
AC.100V/200V TYPE: -20C OVERCURRENT CURVE
AC.100V/200V TYPE: +60C OVERCURRENT CURVE
7 6 Output voltage(V)
Output voltage(V)
7 6 AC.85V 5 AC.85V 4 3 2 1 0 1 2 3 Load current(A) 4 5 0 0 1 2 3 Load current(A) 4 5 AC.240V AC.265V AC.100V
5 4 3 2 1 0
AC.240V AC.265V AC.100V
All specifications are subject to change without notice.
A122_JBW (18/24)
TDK Switching Power Supply
Characteristics, Functions, and Applications
JBW15W Characteristics 3: Typical Characteristics JBW05-3R0
AC.100V TYPE: LIFE OF ELECTROLYTIC CAPACITOR
40 35 30 Life(Years) Life(Years) 25 20 15 10 5 0 20 40 60 Load(%) 80 30C 40C 50C 60C 70C 100
AC.200V TYPE: LIFE OF ELECTROLYTIC CAPACITOR
16 14 12 10 8 6 4 2 0 20 40 60 Load(%) 80 40C 50C 60C 70C 100 30C
AC.100V TYPE: HOLD UP TIME
10000
AC.200V TYPE: HOLD UP TIME
10000
1000 Hold up time(ms)
1000 Hold up time(ms)
100 115V 100V 85V
100
240V 200V 170V
10
10
1 10 25 50 Load(%) 75 100
1 10 25 50 Load(%) 75 100
NOISE TERMINAL VOLTAGE
[dBV] 100 90 80 70 60 50 40 30 20 10 0 -10 0.15 0.5 1 Frequency [MHz] 5 10 20 30 VCCI(QP) VCCI(AV) FCC-B [PEAK DATA]
All specifications are subject to change without notice.
A122_JBW (19/24)
TDK Switching Power Supply
Characteristics, Functions, and Applications
JBW30W Characteristics 1: Typical Characteristics JBW05-6R0
AC.100V TYPE: INPUT CURRENT
1.0
AC.200V TYPE: INPUT CURRENT
0.5 170V
0.8 Input current(A)
85V Input current(A) 100V
0.4 240V 265V
0.6 132V 0.4
0.3
0.2
0.2
0.1
0
0
20
40 60 Load(%)
80
100
0
0
20
40 60 Load(%)
80
100
AC.100V TYPE: EFFICIENCY
100
AC.200V TYPE: EFFICIENCY
100
80
132V 100V 85V Efficiency(%)
80
170V 240V 265V
Efficiency(%)
60
60
40
40
20
20
0
0 0 20 40 60 Load (%) 80 100
0
20
40 60 Load (%)
80
100
AC.100V TYPE: POWER FACTOR
1.0
AC.200V TYPE: POWER FACTOR
1.0
0.8 85V 100V 132V
0.8
Power factor
0.6
Power factor
0.6 170V 240V 265V 0.4
0.4
0.2
0.2
0.0
0
20
40 60 Load (%)
80
100
0.0
0
20
40 60 Load (%)
80
100
AC.100V TYPE: SURGE CURRENT
Vin=100V
AC.200V TYPE: SURGE CURRENT
Vin=240V
31.2A 12.8A
H : 5ms/Div V : 5A/Div
H : 5ms/Div V : 10A/Div
All specifications are subject to change without notice.
A122_JBW (20/24)
TDK Switching Power Supply
Characteristics, Functions, and Applications
JBW30W Characteristics 2: Typical Characteristics JBW05-6R0
AC.100/200V TYPE: -20C START UP CHARACTERISTICS AC.100/200V TYPE: +60C START UP CHARACTERISTICS
AC.265V
AC.265V
AC.85V H : 50ms/Div
AC.85V H : 50ms/Div
AC.100/200V TYPE: -20C HOLD UP CHARACTERISTICS
Off
AC.100/200V TYPE: +60C HOLD UP CHARACTERISTICS
Off
170V 100V 85V
170V 100V 85V
H : 10ms/Div
H : 10ms/Div
AC.100V/200V TYPE: -20C OVERCURRENT CURVE
AC.100V/200V TYPE: +60C OVERCURRENT CURVE
7 6 Output voltage(V) 5 AC.170V 4 3 2 1 0 0 2 4 6 Load current(A) 8 10 AC.265V AC.85V AC.132V
7 6
Output voltage(V)
AC.132V AC.170V
5 4 3 2 AC.85V 1 0 0 2 4 6 Load current(A) 8 10 AC.265V
All specifications are subject to change without notice.
A122_JBW (21/24)
TDK Switching Power Supply
Characteristics, Functions, and Applications
JBW30W Characteristics 3: Typical Characteristics JBW05-6R0
AC.100V TYPE: LIFE OF ELECTROLYTIC CAPACITOR
16 14 12 Life(Years) Life(Years) 10 8 6 4 2 0 20 40 60 Load(%) 80 30C 40C 50C 60C 70C 100
AC.200V TYPE: LIFE OF ELECTROLYTIC CAPACITOR
8 7 6 5 4 3 2 1 0 20 40 60 Load(%) 80 30C
40C 50C 60C 70C 100
AC.100V TYPE: HOLD UP TIME
10000
AC.200V TYPE: HOLD UP TIME
10000
1000 Hold up time(ms)
1000 Hold up time(ms) 240V 200V 170V
100 115V 100V 85V
100
10
10
1 10 25 50 Load(%) 75 100
1 10 25 50 Load(%) 75 100
NOISE TERMINAL VOLTAGE
[dBV] 80 [PEAK DATA]
70 60 VCCI(QP) VCCI(AV) FCC-B
50 40
30 20
10
0 -10
0.15
0.5
1 Frequency [MHz]
5
10
20
30
All specifications are subject to change without notice.
A122_JBW (22/24)
TDK Switching Power Supply
Characteristics, Functions, and Applications
JBW50W Characteristics 1: Typical Characteristics JBW05-10R
AC.100V TYPE: INPUT CURRENT
1.0
AC.200V TYPE: INPUT CURRENT
0.5
0.8 Input current(A)
85V Input current(A) 100V
0.4
170V
0.6 132V 0.4
0.3
240V 265V
0.2
0.2
0.1
0 0 20 40 60 Load(%) 80 100
0 0 20 40 60 Load(%) 80 100
AC.100V TYPE: EFFICIENCY
100
AC.200V TYPE: EFFICIENCY
100 265V 240V 170V
80
132V 100V 85V Efficiency(%)
80
Efficiency(%)
60
60
40
40
20
20
0
0 0 20 40 60 Load (%) 80 100 0 20 40 60 Load (%) 80 100
AC.100V TYPE: POWER FACTOR
1.0 85V 100V 132V
AC.200V TYPE: POWER FACTOR
1.0 170V 240V 265V
0.8
0.8
Power factor
0.6
Power factor 0 20 40 60 Load (%) 80 100
0.6
0.4
0.4
0.2
0.2
0.0
0.0 0 20 40 60 Load (%) 80 100
AC.100V TYPE: SURGE CURRENT
Vin=100V
AC.200V TYPE: SURGE CURRENT
Vin=240V
16.2A H : 5ms/Div V : 10A/Div
43A
H : 5ms/Div V : 20A/Div Enlarged view
Enlarged view
H : 0.2ms/Div V : 10A/Div
H : 0.2ms/Div V : 20A/Div
All specifications are subject to change without notice.
A122_JBW (23/24)
TDK Switching Power Supply
Characteristics, Functions, and Applications
JBW50W Characteristics 2: Typical Characteristics JBW05-10R
AC.100/200V TYPE: -20C START UP CHARACTERISTICS AC.100/200V TYPE: +60C START UP CHARACTERISTICS
AC.265V
AC.265V
AC.85V H : 50ms/Div
AC.85V H : 50ms/Div
AC.100/200V TYPE: -20C HOLD UP CHARACTERISTICS
Off
AC.100/200V TYPE: +60C HOLD UP CHARACTERISTICS
Off
AC.170V AC.100V AC.85V
AC.170V AC.100V AC.85V
H : 10ms/Div
H : 10ms/Div
AC.100V/200V TYPE: -20C OVERCURRENT CURVE
AC.100V/200V TYPE: +60C OVERCURRENT CURVE
7 6 Output voltage(V) 5 4 3 2
7 6 Output voltage(V) 5 4 3 2 AC.100V 1 0 0 4 8 12 Load current(A) 16 20 AC.240V
AC.100V 1 0 0 4 8 12 Load current(A) 16 20 AC.240V
All specifications are subject to change without notice.
A122_JBW (24/24)
TDK Switching Power Supply
Characteristics, Functions, and Applications
JBW50W Characteristics 3: Typical Characteristics JBW05-10R
AC.100V TYPE: LIFE OF ELECTROLYTIC CAPACITOR
8 7 6 Life(Years) Life(Years) 5 4 3 30C 2 1 60C 0 20 40 60 Load(%) 80 100 40C 50C 0 20 40 60 Load(%) 80 100
AC.200V TYPE: LIFE OF ELECTROLYTIC CAPACITOR
8 7 6 5 4 3 2 1 60C 40C 50C 30C
AC.100V TYPE: HOLD UP TIME
1000
AC.200V TYPE: HOLD UP TIME
1000
Hold up time(ms)
Hold up time(ms)
100 115V 100V 85V 10
100 240V 200V 170V 10
1 10 25 50 Load(%) 75 100
1
10
25
50 Load(%)
75
100
NOISE TERMINAL VOLTAGE
[dBV] 90 80 [PEAK DATA]
70 60 VCCI-B(QP) VCCI-B(AV) FCC-B
50 40
30 20
10 0
0.15
0.5
1 Frequency [MHz]
5
10
20
30
A122_JBW 020206
All specifications are subject to change without notice.


▲Up To Search▲   

 
Price & Availability of JBW05-10R

All Rights Reserved © IC-ON-LINE 2003 - 2022  
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]
 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X